Trapezoidal and facade sheets

Modular roofs

Roof tile sheets

Roof panels

Trapezoidal and facade sheets

Gutter systems

System of Modular Flashings MOD

Soffit

Fence systems

Drywall profiles and accessories

Steel purlins

PVC granules and blends

PV Systems

Trapezoidal and facade sheets - TRB - 18/1124 roof profile / facade - trapezoidal sheets

Technical parameters

Total width [mm] - 1163/1170
Effective width [mm] - 1124
Sheet thickness [mm] - 0,5 - 0,88
Length of sheet [mm] - 500 - 12000
Overall height [mm] - 17
Available in coatings - GreenCoat X-Matt Crown BT, Polyester Glance, Ultramat, Aluzink, galvanized, S-PURE, Safe-Matt. Available foiling for the façade profile.
Minimal roof slope - 6° (10%)

Standard finishing elements

Verge trim PP 150, PP 180, PP 220

Eaves board protection element.

Eaves flashing PN 80, PN 120

The element leading water into the gutter from the roof.

Lower barge flashing WD 150 L/R, WD 180 L/R

Element protecting the gable board.

Inner barge flashing WW 83 L/R

Protection against seepage and leaks.

Outer barge flashing WZ 224 L/R

An element that protects the roofing from being torn up by the wind.

Wall flashing OP 190 L/R

The element is installed at the point of contact between the roof slope and the wall.

Valley gutter RKS 25

The element is installed at the point of concave contact of adjacent roof slopes.

Ridge cap GTR